summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-19cc1101: Factor out and simplify ANN_* names.Uwe Hermann
2019-04-19Add a TI CC1101 decoder.Marco
2019-04-15sdcard_spi: Fix duplicated 'End bit' annotation emission.Uwe Hermann
2019-04-15sdcard_spi: Fix incorrect annotation row indices.Uwe Hermann
This fixes the remaining parts of bug #1365.
2019-04-15sdcard_spi: handle_data_response(): Shorten a few lines.Uwe Hermann
2019-04-15sdcard_spi: handle_data_response(): Add comment, cosmetics.Uwe Hermann
2019-04-15sdcard_spi: Fix some abbreviations and names to match the spec.Uwe Hermann
The official abbreviation for CMD24 in the spec is "WRITE_BLOCK", as opposed to "WRITE_MULTIPLE_BLOCK" for CMD25 (chapter 4.7.4, "Detailed Command Description", table 4-24). The byte preceeding e.g. the CMD24 block data is called "Start Block" token (chapter 7.3.3.2, "Start Block Tokens and Stop Tran Token"). We don't include the "token" itself for consistency, since the decoder doesn't do that for any other tokens either.
2019-04-14sdcard_spi: touch up CMD24 handlingGerhard Sittig
Address some nits in the SDCard (SPI mode) protocol decoder. Rename identifiers to eliminate comments. Determine the default block size at the start of the write command instead of the iteration over payload data bytes. Remove a print() statement which would break regression tests. Allow re-use of the data handler for other commands, too. Use lower case hex digits for consistency across the source file, and slightly unobfuscate a bit pattern check while we are here. Improve robustness of response handlers and how internal state gets advanced. Replace constant lookups by direct method calls.
2019-04-14sdcard_spi: add support for CMD24 including payload dataPierre Poulain
The previous implementation advanced from the start of CMD24 to IDLE. This commit introduces support for the data phase and data response of CMD24. Which results in improved usability of the decoder output, and reduced probability of false positives (don't detect "commands" in the payload data). This commit addresses the missing CMD24 handling part of bug #1365.
2019-04-02srd_inst_stack(): Warn upon potentially incorrect stacking.Uwe Hermann
Currently there must be at least one match of inputs/outputs for decoders that are stacked. If not, we emit an informational warning (but this is not a hard error for the time being).
2019-04-02decoders: Fix incorrect 'outputs' fields.Uwe Hermann
Only add items to 'outputs' if the respective PD actually has OUTPUT_PYTHON support implemented as of right now. Various decoders might get OUTPUT_PYTHON support later, but the 'outputs' field should reflect the current status.
2019-03-28ds2408: Add missing tags.Uwe Hermann
2019-03-28add a Maxim DS2408 decoderMariusz Bialonczyk
This is a 1-Wire 8-channel addressable switch.
2019-03-28onewire_network: add a 'Disable Test Mode' command for DS2408Mariusz Bialonczyk
For details see the DS2408 datasheet, section "Power-up timing". This commit is adding this missing command so now a full decoding is possible: Annotations from 1-Wire network layer: 8990980-8991220 1-Wire network layer: : Reset/presence: true 8994163-8994437 1-Wire network layer: : ROM command: 0x96 'DS2408: Disable Test Mode' 8995026-9008178 1-Wire network layer: : ROM: 0xa30000001246a929 9008785-9009060 1-Wire network layer: : Data: 0x3c 9012290-9012530 1-Wire network layer: : Reset/presence: true And from the specific stacked DS2408 slave: 8990980-8991220 DS2408: : Reset/presence: true 8995026-9008178 DS2408: : ROM: 0xa30000001246a929 (family code 0x29) 9008785-9009060 DS2408: : Disable Test Mode (0x3c) 9012290-9012530 DS2408: : Reset/presence: true
2019-03-28onewire_network: add a missing 'Resume ROM' commandMariusz Bialonczyk
For details see the DS2408 datasheet, section "Resume Command [A5h]".
2019-03-16decoders: Various cosmetic/consistency/typo fixes.Uwe Hermann
2019-03-15HACKING: Document current tags and their intention/usage.Uwe Hermann
2019-03-15decoders: Add/update tags for each PD.Uwe Hermann
2019-03-13Add PD tags handling and some tagsSoeren Apel
2019-01-30jtag_ejtag: Shorten a variable name.Uwe Hermann
2019-01-30Rename values that shadow built-in keywordsRyan Jarvis
2019-01-30Remove trailing semicolonsRyan Jarvis
2019-01-30Fix obvious typos with string formattersRyan Jarvis
2019-01-30Typo preventing "Personal preference settings" & "Display user info on ↵Ryan Jarvis
screen" from functioning Source: https://en.wikipedia.org/wiki/RC-5#Command_Tables
2019-01-29Comparison to None should use "is/is not" instead of "==/!="Ryan Jarvis
2019-01-29DS1307: Bugs fixes.Libor Gabaj
- Square wave frequencies above 1 Hz are in Hz not in kHz. - AM/PM flag is in the bit 5 of hours register not in bit 6. - AM flag is valid at 0 value of AM/PM flag not at 1 value.
2018-11-25uart: remove obsolete TODO (Python annotation for frame errors)Gerhard Sittig
The "Frame error?" TODO comment on Python annotations has become obsolete. Individual bit errors within the frame immediately get communicated as they are detected (START, parity, STOP). The overall frame's validity has become available with the FRAME annotation.
2018-11-25uart: add FRAME Python annotation, communicate frame validityGerhard Sittig
Internally keep track of the UART frame's validity. Emit a FRAME Python annotation for aborted as well as for completed frames. This obsoletes a TODO comment in the STOP bit code path. This annotation also spans the complete frame's length, including start and parity and stop bits, which the DATA annotation doesn't cover. Stacked decoders can individually decide whether to strictly reference the mere data bits section or the complete UART frame which happened to communicate the data value.
2018-11-25uart: document the Python annotation for BREAKGerhard Sittig
2018-11-20i2s: Fix 2 issues.Weixiao Zhang
1. WS = 0, Left Channel; WS = 1, Right Channel 2. Data start and end at falling edge of SCK
2018-11-10x2444m: Add some shorter annotation strings as well.Uwe Hermann
2018-11-10x2444m: Move variable initializations to reset().Uwe Hermann
2018-11-10x2444m: Make each command an extra annotation class.Uwe Hermann
2018-11-09Decoder for Xicor X2444M, nonvolatile static RAM.Stefan Petersen
2018-10-21decoder: consider reset() a mandatory decoder methodGerhard Sittig
In theory support for PD reset is optional, applications are not required to make use of it. But it's essential to receive correct decoding results when used with the popular Pulseview mainline application. So let's consider the absence of the reset() method fatal. All mainline decoders have it. Out-of-tree decoders are easy to adjust, and very probably should support reset() as well. Thus this change is considered beneficial, and not harmful.
2018-10-21miller: add reset() methodGerhard Sittig
2018-10-21lin: Simplify state handling a bit.Uwe Hermann
2018-10-21lin: handle_break(): Use self.putx().Uwe Hermann
2018-10-21lin: Simplify LinFsm._transition_allowed().Uwe Hermann
2018-10-21add LIN protocol decoderstephan.thiele
2018-10-21spiflash: Remember write protection latch from status registersVesa-Pekka Palmu
2018-10-21spiflash: Bugfix: WRSR was using miso for register decodeVesa-Pekka Palmu
2018-10-21spiflash: Initial support for write enable state trackingVesa-Pekka Palmu
2018-10-21spiflash: Handle chip eraseVesa-Pekka Palmu
Minimal implementation of chip erase 0x60 and 0xc7 command handling
2018-10-21spiflash: Add Winbond W25Q80DV metadata.Uwe Hermann
2018-10-21Fix GVariant memory leaks in session test codeJon Burgess
==187759== 88 (40 direct, 48 indirect) bytes in 1 blocks are definitely lost in loss record 2,262 of 3,218 ==187759== at 0x4C2EBAB: malloc (vg_replace_malloc.c:299) ==187759== by 0x563C435: g_malloc (in /usr/lib64/libglib-2.0.so.0.5600.3) ==187759== by 0x5654056: g_slice_alloc (in /usr/lib64/libglib-2.0.so.0.5600.3) ==187759== by 0x5673630: g_variant_new_from_bytes (in /usr/lib64/libglib-2.0.so.0.5600.3) ==187759== by 0x566C5E6: ??? (in /usr/lib64/libglib-2.0.so.0.5600.3) ==187759== by 0x566C7D2: g_variant_new_uint64 (in /usr/lib64/libglib-2.0.so.0.5600.3) ==187759== by 0x403D41: conf_check_fail.constprop.6 (session.c:152) ==187759== by 0x403E06: test_session_metadata_set_bogus (session.c:215) ==187759== by 0x53E51D5: srunner_run_tagged (in /usr/lib64/libcheck.so.0.0.0) ==187759== by 0x401237: main (main.c:51)
2018-10-21Fix memory leak in decoder test codeJon Burgess
==187724== 917 bytes in 1 blocks are definitely lost in loss record 3,046 of 3,207 ==187724== at 0x4C2EBAB: malloc (vg_replace_malloc.c:299) ==187724== by 0x563C435: g_malloc (in /usr/lib64/libglib-2.0.so.0.5600.3) ==187724== by 0x5655D82: g_strdup (in /usr/lib64/libglib-2.0.so.0.5600.3) ==187724== by 0x4E43937: py_str_as_str (util.c:371) ==187724== by 0x4E415E1: srd_decoder_doc_get (decoder.c:892) ==187724== by 0x40281D: test_doc_get (decoder.c:395) ==187724== by 0x53E51D5: srunner_run_tagged (in /usr/lib64/libcheck.so.0.0.0) ==187724== by 0x401237: main (main.c:51)
2018-10-21Fix memory leak in print_searchpaths()Jon Burgess
==175453== 522 bytes in 8 blocks are definitely lost in loss record 2,923 of 3,201 ==175453== at 0x4C2EBAB: malloc (vg_replace_malloc.c:299) ==175453== by 0x59E9BB5: PyObject_Malloc (in /usr/lib64/libpython3.6m.so.1.0) ==175453== by 0x5A35A76: PyBytes_FromStringAndSize (in /usr/lib64/libpython3.6m.so.1.0) ==175453== by 0x4E3FA6E: print_searchpaths (srd.c:173) ==175453== by 0x4E3FA6E: srd_init (srd.c:287) ==175453== by 0x4034BE: test_session_reset_nodata (session.c:238) ==175453== by 0x53E51D5: srunner_run_tagged (in /usr/lib64/libcheck.so.0.0.0) ==175453== by 0x401237: main (main.c:51)
2018-10-21Fix bad memory accesses during srd_exit()Jon Burgess
When the decoder and session unload functions are called they remove themselves from the list. The code walking the list must be careful to avoid accessing the next pointer which might now be invalid. The g_slist_foreach() takes care of this. Reports from Valgrind before fix: ==175436== Invalid read of size 8 -- ==175436== Address 0xe3f2598 is 8 bytes inside a block of size 16 free'd ==175436== at 0x4C2FDAC: free (vg_replace_malloc.c:530) ==175436== by 0x563C541: g_free (in /usr/lib64/libglib-2.0.so.0.5600.3) ==175436== by 0x5654783: g_slice_free1 (in /usr/lib64/libglib-2.0.so.0.5600.3) ==175436== by 0x56552A2: g_slist_remove (in /usr/lib64/libglib-2.0.so.0.5600.3) ==175436== by 0x4E3FEFF: srd_session_destroy (session.c:343) ==175436== by 0x4E3F5C7: srd_exit (srd.c:311) ==175436== by 0x40336F: test_inst_new (inst.c:40) ==175436== by 0x53E51D5: srunner_run_tagged (in /usr/lib64/libcheck.so.0.0.0) ==175436== by 0x401237: main (main.c:51) ==175436== Block was alloc'd at ==175436== at 0x4C2EBAB: malloc (vg_replace_malloc.c:299) ==175436== by 0x563C435: g_malloc (in /usr/lib64/libglib-2.0.so.0.5600.3) ==175436== by 0x5654056: g_slice_alloc (in /usr/lib64/libglib-2.0.so.0.5600.3) ==175436== by 0x5655797: g_slist_append (in /usr/lib64/libglib-2.0.so.0.5600.3) ==175436== by 0x4E3FC75: srd_session_new (session.c:71) ==175436== by 0x403345: test_inst_new (inst.c:37) ==175436== by 0x53E51D5: srunner_run_tagged (in /usr/lib64/libcheck.so.0.0.0) ==175436== by 0x401237: main (main.c:51)
2018-10-16Update a few Doxygen @since tags.Uwe Hermann
Drop @since tags for non-public functions.
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-15 18:51:12 +0000