diff options
Diffstat (limited to 'decoders')
| -rw-r--r-- | decoders/qi/__init__.py | 26 | ||||
| -rw-r--r-- | decoders/qi/pd.py | 244 |
2 files changed, 270 insertions, 0 deletions
diff --git a/decoders/qi/__init__.py b/decoders/qi/__init__.py new file mode 100644 index 0000000..35ffe5b --- /dev/null +++ b/decoders/qi/__init__.py @@ -0,0 +1,26 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2015 Josef Gajdusek <atx@atx.name> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +''' +This decoder decodes demodulated data streams used by the Qi standard +for communication from the receiver to the charging station. +''' + +from .pd import Decoder diff --git a/decoders/qi/pd.py b/decoders/qi/pd.py new file mode 100644 index 0000000..cba4ce9 --- /dev/null +++ b/decoders/qi/pd.py @@ -0,0 +1,244 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2015 Josef Gajdusek <atx@atx.name> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +import sigrokdecode as srd +import operator +import collections +from functools import reduce + +end_codes = ( + 'Unknown', + 'Charge Complete', + 'Internal Fault', + 'Over Temperature', + 'Over Voltage', + 'Over Current', + 'Battery Failure', + 'Reconfigure', + 'No Response', +) + +class SamplerateError(Exception): + pass + +def calc_checksum(packet): + return reduce(operator.xor, packet[:-1]) + +def bits_to_uint(bits): + # LSB first + return reduce(lambda i, v: (i >> 1) | (v << (len(bits) - 1)), bits, 0) + +class Decoder(srd.Decoder): + api_version = 2 + id = 'qi' + name = 'Qi' + longname = 'Qi charger protocol' + desc = 'Protocol used by Qi receiver' + license = 'gplv2+' + inputs = ['logic'] + outputs = ['qi'] + channels = ( + {'id': 'qi', 'name': 'Qi', 'desc': 'Demodulated Qi data line'}, + ) + annotations = ( + ('bits', 'Bits'), + ('bytes-errors', 'Bit errors'), + ('bytes-start', 'Start bits'), + ('bytes-info', 'Info bits'), + ('bytes-data', 'Data bytes'), + ('packets-data', 'Packet data'), + ('packets-checksum-ok', 'Packet checksum'), + ('packets-checksum-err', 'Packet checksum'), + ) + annotation_rows = ( + ('bits', 'Bits', (0,)), + ('bytes', 'Bytes', (1, 2, 3, 4)), + ('packets', 'Packets', (5, 6, 7)), + ) + + def __init__(self, **kwargs): + self.samplerate = None + self.reset_variables() + + def reset_variables(self): + self.counter = 0 + self.prev = None + self.state = 'IDLE' + self.lastbit = 0 + self.bytestart = 0 + self.deq = collections.deque(maxlen = 2) + self.bits = [] + self.bitsi = [0] + self.bytesi = [] + self.packet = [] + + def metadata(self, key, value): + if key == srd.SRD_CONF_SAMPLERATE: + self.samplerate = value + self.bit_width = float(self.samplerate) / 2e3 + + def start(self): + self.out_ann = self.register(srd.OUTPUT_ANN) + self.reset_variables() + + def packet_len(self, byte): + if 0x00 <= byte <= 0x1f: + return int(1 + (byte - 0) / 32) + if 0x20 <= byte <= 0x7f: + return int(2 + (byte - 32) / 16) + if 0x80 <= byte <= 0xdf: + return int(8 + (byte - 128) / 8) + if 0xe0 <= byte <= 0xff: + return int(20 + (byte - 224) / 4) + + def in_tolerance(self, l): + return (0.75 * self.bit_width) < l < (1.25 * self.bit_width) + + def putp(self, data): + self.put(self.bytesi[0], self.bytesi[-1], self.out_ann, [5, data]) + + def process_packet(self): + if self.packet[0] == 0x01: # Signal Strength + self.putp(['Signal Strength: %d' % self.packet[1], + 'SS: %d' % self.packet[1], 'SS']) + elif self.packet[0] == 0x02: # End Power Transfer + reason = end_codes[self.packet[1]] if self.packet[1] < len(end_codes) else 'Reserved' + self.putp(['End Power Transfer: %s' % reason, + 'EPT: %s' % reason, 'EPT']) + elif self.packet[0] == 0x03: # Control Error + val = self.packet[1] if self.packet[1] < 128 else (self.packet[1] & 0x7f) - 128 + self.putp(['Control Error: %d' % val, 'CE: %d' % val, 'CE']) + elif self.packet[0] == 0x04: # Received Power + self.putp(['Received Power: %d' % self.packet[1], + 'RP: %d' % self.packet[1], 'RP']) + elif self.packet[0] == 0x05: # Charge Status + self.putp(['Charge Status: %d' % self.packet[1], + 'CS: %d' % self.packet[1], 'CS']) + elif self.packet[0] == 0x06: # Power Control Hold-off + self.putp(['Power Control Hold-off: %dms' % self.packet[1], + 'PCH: %d' % self.packet[1]], 'PCH') + elif self.packet[0] == 0x51: # Configuration + powerclass = (self.packet[1] & 0xc0) >> 7 + maxpower = self.packet[1] & 0x3f + prop = (self.packet[3] & 0x80) >> 7 + count = self.packet[3] & 0x07 + winsize = (self.packet[4] & 0xf8) >> 3 + winoff = self.packet[4] & 0x07 + self.putp(['Configuration: Power Class = %d, Maximum Power = %d, Prop = %d,' + 'Count = %d, Window Size = %d, Window Offset = %d' % + (powerclass, maxpower, prop, count, winsize, winoff), + 'C: PC = %d MP = %d P = %d C = %d WS = %d WO = %d' % + (powerclass, maxpower, prop, count, winsize, winoff), + 'Configuration', 'C']) + elif self.packet[0] == 0x71: # Identification + version = '%d.%d' % ((self.packet[1] & 0xf0) >> 4, self.packet[1] & 0x0f) + mancode = '%02x%02x' % (self.packet[2], self.packet[3]) + devid = '%02x%02x%02x%02x' % (self.packet[4] & ~0x80, + self.packet[5], self.packet[6], self.packet[7]) + self.putp(['Identification: Version = %s, Manufacturer = %s, ' \ + 'Device = %s' % (version, mancode, devid), + 'ID: %s %s %s' % (version, mancode, devid), 'ID']) + elif self.packet[0] == 0x81: # Extended Identification + edevid = '%02x%02x%02x%02x%02x%02x%02x%02x' % self.packet[1:-1] + self.putp(['Extended Identification: %s' % edevid, + 'EI: %s' % edevid, 'EI']) + elif self.packet[0] in (0x18, 0x19, 0x28, 0x29, 0x38, 0x48, 0x58, 0x68, + 0x78, 0x85, 0xa4, 0xc4, 0xe2): # Proprietary + self.putp(['Proprietary', 'P']) + else: # Unknown + self.putp(['Unknown', '?']) + self.put(self.bytesi[-1], self.samplenum, self.out_ann, + [6, ['Checksum OK', 'OK']] if \ + calc_checksum(self.packet) == self.packet[-1] + else [6, ['Checksum error', 'ERR']]) + + def process_byte(self): + self.put(self.bytestart, self.bitsi[0], self.out_ann, + ([2, ['Start bit', 'Start', 'S']]) if self.bits[0] == 0 else + ([1, ['Start error', 'Start err', 'SE']])) + databits = self.bits[1:9] + data = bits_to_uint(databits) + parity = reduce(lambda i, v: (i + v) % 2, databits, 1) + self.put(self.bitsi[0], self.bitsi[8], self.out_ann, [4, ['%02x' % data]]) + self.put(self.bitsi[8], self.bitsi[9], self.out_ann, + ([3, ['Parity bit', 'Parity', 'P']]) if self.bits[9] == parity else + ([1, ['Parity error', 'Parity err', 'PE']])) + self.put(self.bitsi[9], self.bitsi[10], self.out_ann, + ([3, ['Stop bit', 'Stop', 'S']]) if self.bits[10] == 1 else + ([1, ['Stop error', 'Stop err', 'SE']])) + + self.bytesi.append(self.bytestart) + self.packet.append(data) + if self.packet_len(self.packet[0]) + 2 == len(self.packet): + self.process_packet() + self.bytesi.clear() + self.packet.clear() + + def add_bit(self, bit): + self.bits.append(bit) + self.bitsi.append(self.samplenum) + + if self.state == 'IDLE' and len(self.bits) >= 5 and \ + self.bits[-5:] == [1, 1, 1, 1, 0]: + self.state = 'DATA' + self.bytestart = self.bitsi[-2] + self.bits = [0] + self.bitsi = [self.samplenum] + self.packet.clear() + elif self.state == 'DATA' and len(self.bits) == 11: + self.process_byte() + self.bytestart = self.samplenum + self.bits.clear() + self.bitsi.clear() + if self.state != 'IDLE': + self.put(self.lastbit, self.samplenum, self.out_ann, [0, ['%d' % bit]]) + self.lastbit = self.samplenum + + def handle_transition(self, l, htl): + self.deq.append(l) + if len(self.deq) >= 2 and \ + (self.in_tolerance(self.deq[-1] + self.deq[-2]) or \ + htl and self.in_tolerance(l * 2) and \ + self.deq[-2] > 1.25 * self.bit_width): + self.add_bit(1) + self.deq.clear() + elif self.in_tolerance(l): + self.add_bit(0) + self.deq.clear() + elif l > (1.25 * self.bit_width): + self.state = 'IDLE' + self.bytesi.clear() + self.packet.clear() + self.bits.clear() + self.bitsi.clear() + + def next_sample(self, s): + if s == self.prev: + self.counter += 1 + else: + self.handle_transition(self.counter, s == 0) + self.prev = s + self.counter = 1 + + def decode(self, ss, es, data): + if not self.samplerate: + raise SamplerateError('Cannot decode without samplerate.') + for (self.samplenum, (qi,)) in data: + self.next_sample(qi) |