summaryrefslogtreecommitdiff
path: root/decoders
diff options
context:
space:
mode:
Diffstat (limited to 'decoders')
-rw-r--r--decoders/mx25lxx05d/mx25lxx05d.py139
1 files changed, 47 insertions, 92 deletions
diff --git a/decoders/mx25lxx05d/mx25lxx05d.py b/decoders/mx25lxx05d/mx25lxx05d.py
index 1d41fd4..f3c74ef 100644
--- a/decoders/mx25lxx05d/mx25lxx05d.py
+++ b/decoders/mx25lxx05d/mx25lxx05d.py
@@ -24,67 +24,34 @@
import sigrokdecode as srd
-# States
-IDLE = -1
-
-# Chip commands (also used as additional decoder states).
-CMD_WREN = 0x06
-CMD_WRDI = 0x04
-CMD_RDID = 0x9f
-CMD_RDSR = 0x05
-CMD_WRSR = 0x01
-CMD_READ = 0x03
-CMD_FAST_READ = 0x0b
-CMD_2READ = 0xbb
-CMD_SE = 0x20
-CMD_BE = 0xd8
-CMD_CE = 0x60
-CMD_CE2 = 0xc7
-CMD_PP = 0x02
-CMD_CP = 0xad
-CMD_DP = 0xb9
-# CMD_RDP = 0xab
-# CMD_RES = 0xab
-CMD_RDP_RES = 0xab # Note: RDP/RES have the same ID.
-CMD_REMS = 0x90
-CMD_REMS2 = 0xef
-CMD_ENSO = 0xb1
-CMD_EXSO = 0xc1
-CMD_RDSCUR = 0x2b
-CMD_WRSCUR = 0x2f
-CMD_ESRY = 0x70
-CMD_DSRY = 0x80
-
-# TODO: (Short) command names as strings in a dict, too?
-
-# Dict which maps command IDs to their description.
+# Dict which maps command IDs to their names and descriptions.
cmds = {
- CMD_WREN: 'Write enable',
- CMD_WRDI: 'Write disable',
- CMD_RDID: 'Read identification',
- CMD_RDSR: 'Read status register',
- CMD_WRSR: 'Write status register',
- CMD_READ: 'Read data',
- CMD_FAST_READ: 'Fast read data',
- CMD_2READ: '2x I/O read',
- CMD_SE: 'Sector erase',
- CMD_BE: 'Block erase',
- CMD_CE: 'Chip erase',
- CMD_CE2: 'Chip erase', # Alternative command ID
- CMD_PP: 'Page program',
- CMD_CP: 'Continuously program mode',
- CMD_DP: 'Deep power down',
- # CMD_RDP: 'Release from deep powerdown',
- # CMD_RES: 'Read electronic ID',
- CMD_RDP_RES: 'Release from deep powerdown / Read electronic ID',
- CMD_REMS: 'Read electronic manufacturer & device ID',
- CMD_REMS2: 'Read ID for 2x I/O mode',
- CMD_ENSO: 'Enter secured OTP',
- CMD_EXSO: 'Exit secured OTP',
- CMD_RDSCUR: 'Read security register',
- CMD_WRSCUR: 'Write security register',
- CMD_ESRY: 'Enable SO to output RY/BY#',
- CMD_DSRY: 'Disable SO to output RY/BY#',
+ 0x06: ('WREN', 'Write enable'),
+ 0x04: ('WRDI', 'Write disable'),
+ 0x9f: ('RDID', 'Read identification'),
+ 0x05: ('RDSR', 'Read status register'),
+ 0x01: ('WRSR', 'Write status register'),
+ 0x03: ('READ', 'Read data'),
+ 0x0b: ('FAST_READ', 'Fast read data'),
+ 0xbb: ('2READ', '2x I/O read'),
+ 0x20: ('SE', 'Sector erase'),
+ 0xd8: ('BE', 'Block erase'),
+ 0x60: ('CE', 'Chip erase'),
+ 0xc7: ('CE2', 'Chip erase'), # Alternative command ID
+ 0x02: ('PP', 'Page program'),
+ 0xad: ('CP', 'Continuously program mode'),
+ 0xb9: ('DP', 'Deep power down'),
+ # 0xab: ('RDP', 'Release from deep powerdown'),
+ # 0xab: ('RES', 'Read electronic ID'),
+ 0xab: ('RDP_RES', 'Release from deep powerdown / Read electronic ID'),
+ 0x90: ('REMS', 'Read electronic manufacturer & device ID'),
+ 0xef: ('REMS2', 'Read ID for 2x I/O mode'),
+ 0xb1: ('ENSO', 'Enter secured OTP'),
+ 0xc1: ('EXSO', 'Exit secured OTP'),
+ 0x2b: ('RDSCUR', 'Read security register'),
+ 0x2f: ('WRSCUR', 'Write security register'),
+ 0x70: ('ESRY', 'Enable SO to output RY/BY#'),
+ 0x80: ('DSRY', 'Disable SO to output RY/BY#'),
}
device_name = {
@@ -138,7 +105,7 @@ class Decoder(srd.Decoder):
]
def __init__(self, **kwargs):
- self.state = IDLE
+ self.state = None
self.cmdstate = 1 # TODO
self.addr = 0
self.data = []
@@ -155,15 +122,15 @@ class Decoder(srd.Decoder):
self.put(self.ss, self.es, self.out_ann, data)
def handle_wren(self, mosi, miso):
- self.putx([0, ['Command: %s' % cmds[self.cmd]]])
- self.state = IDLE
+ self.putx([0, ['Command: %s' % cmds[self.cmd][1]]])
+ self.state = None
# TODO: Check/display device ID / name
def handle_rdid(self, mosi, miso):
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
self.start_sample = self.ss
- self.putx([0, ['Command: %s' % cmds[self.cmd]]])
+ self.putx([0, ['Command: %s' % cmds[self.cmd][1]]])
elif self.cmdstate == 2:
# Byte 2: Slave sends the JEDEC manufacturer ID.
self.putx([0, ['Manufacturer ID: 0x%02x' % miso]])
@@ -180,7 +147,7 @@ class Decoder(srd.Decoder):
# TODO: Same device ID? Check!
d = 'Device: Macronix %s' % device_name[self.device_id]
self.put(self.start_sample, self.es, self.out_ann, [0, [d]])
- self.state = IDLE
+ self.state = None
else:
self.cmdstate += 1
@@ -191,7 +158,7 @@ class Decoder(srd.Decoder):
# Byte 1: Master sends command ID.
self.addr = 0
self.start_sample = self.ss
- self.putx([0, ['Command: %s' % cmds[self.cmd]]])
+ self.putx([0, ['Command: %s' % cmds[self.cmd][1]]])
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends sectror address (24bits, MSB-first).
self.addr |= (mosi << ((4 - self.cmdstate) * 8))
@@ -206,7 +173,7 @@ class Decoder(srd.Decoder):
# Sector addresses must be 4K-aligned (same for all 3 chips).
d = 'Warning: Invalid sector address!' # TODO: type == WARN?
self.put(self.start_sample, self.es, self.out_ann, [0, [d]])
- self.state = IDLE
+ self.state = None
else:
self.cmdstate += 1
@@ -214,7 +181,7 @@ class Decoder(srd.Decoder):
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
self.start_sample = self.ss
- self.putx([0, ['Command: %s' % cmds[self.cmd]]])
+ self.putx([0, ['Command: %s' % cmds[self.cmd][1]]])
elif self.cmdstate in (2, 3):
# Bytes 2/3: Master sends two dummy bytes.
# TODO: Check dummy bytes? Check reply from device?
@@ -244,7 +211,7 @@ class Decoder(srd.Decoder):
self.end_sample = self.es
id = self.ids[1] if self.manufacturer_id_first else self.ids[0]
self.putx([0, ['Device: Macronix %s' % device_name[id]]])
- self.state = IDLE
+ self.state = None
else:
self.cmdstate += 1
@@ -255,7 +222,7 @@ class Decoder(srd.Decoder):
# When done, the master de-asserts CS# again.
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([0, ['Command: %s' % cmds[self.cmd]]])
+ self.putx([0, ['Command: %s' % cmds[self.cmd][1]]])
elif self.cmdstate >= 2:
# Bytes 2-x: Slave sends status register as long as master clocks.
if self.cmdstate <= 3: # TODO: While CS# asserted.
@@ -263,7 +230,7 @@ class Decoder(srd.Decoder):
self.putx([0, [decode_status_reg(miso)]])
if self.cmdstate == 3: # TODO: If CS# got de-asserted.
- self.state = IDLE
+ self.state = None
return
self.cmdstate += 1
@@ -273,7 +240,7 @@ class Decoder(srd.Decoder):
# page address, sends >= 1 data bytes, de-asserts CS#.
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([0, ['Command: %s' % cmds[self.cmd]]])
+ self.putx([0, ['Command: %s' % cmds[self.cmd][1]]])
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends page address (24bits, MSB-first).
self.addr |= (mosi << ((4 - self.cmdstate) * 8))
@@ -294,7 +261,7 @@ class Decoder(srd.Decoder):
s = ''.join(map(chr, self.data))
self.putx([0, ['Page data: %s' % s]])
self.data = []
- self.state = IDLE
+ self.state = None
return
self.cmdstate += 1
@@ -304,7 +271,7 @@ class Decoder(srd.Decoder):
# 3-byte address, reads >= 1 data bytes, de-asserts CS#.
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([0, ['Command: %s' % cmds[self.cmd]]])
+ self.putx([0, ['Command: %s' % cmds[self.cmd][1]]])
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends read address (24bits, MSB-first).
self.addr |= (mosi << ((4 - self.cmdstate) * 8))
@@ -325,7 +292,7 @@ class Decoder(srd.Decoder):
s = ''.join(map(chr, self.data))
self.putx([0, ['Read data: %s' % s]])
self.data = []
- self.state = IDLE
+ self.state = None
return
self.cmdstate += 1
@@ -353,7 +320,7 @@ class Decoder(srd.Decoder):
self.ss, self.es = ss, es
# If we encountered a known chip command, enter the resp. state.
- if self.state == IDLE:
+ if self.state == None:
if cmd in cmds:
self.state = cmd
self.cmd = cmd # TODO: Eliminate?
@@ -362,22 +329,10 @@ class Decoder(srd.Decoder):
pass # TODO
# Handle commands.
- # TODO: Use some generic way to invoke the resp. method.
- if self.state == CMD_WREN:
- self.handle_wren(mosi, miso)
- elif self.state == CMD_SE:
- self.handle_se(mosi, miso)
- elif self.state == CMD_RDID:
- self.handle_rdid(mosi, miso)
- elif self.state == CMD_REMS:
- self.handle_rems(mosi, miso)
- elif self.state == CMD_RDSR:
- self.handle_rdsr(mosi, miso)
- elif self.state == CMD_PP:
- self.handle_pp(mosi, miso)
- elif self.state == CMD_READ:
- self.handle_read(mosi, miso)
+ if self.state in cmds.keys():
+ handle_reg = getattr(self, 'handle_%s' % cmds[self.cmd][0].lower())
+ handle_reg(mosi, miso)
else:
self.put(0, 0, self.out_ann, [0, ['Unknown command: 0x%02x' % cmd]])
- self.state = IDLE
+ self.state = None
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-15 19:37:44 +0000