diff options
Diffstat (limited to 'decoders/usb_signalling/pd.py')
| -rw-r--r-- | decoders/usb_signalling/pd.py | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/decoders/usb_signalling/pd.py b/decoders/usb_signalling/pd.py new file mode 100644 index 0000000..3272cbf --- /dev/null +++ b/decoders/usb_signalling/pd.py @@ -0,0 +1,152 @@ +## +## This file is part of the sigrok project. +## +## Copyright (C) 2011 Gareth McMullin <gareth@blacksphere.co.nz> +## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# USB signalling (low-speed and full-speed) protocol decoder + +import sigrokdecode as srd + +# Low-/full-speed symbols (used as states of our state machine, too). +# Note: Low-speed J and K are inverted compared to the full-speed J and K! +symbols_ls = { + # (<dp>, <dm>): <symbol/state> + (0, 0): 'SE0', + (1, 0): 'K', + (0, 1): 'J', + (1, 1): 'SE1', +} +symbols_fs = { + # (<dp>, <dm>): <symbol/state> + (0, 0): 'SE0', + (1, 0): 'J', + (0, 1): 'K', + (1, 1): 'SE1', +} + +class Decoder(srd.Decoder): + api_version = 1 + id = 'usb_signalling' + name = 'USB signalling' + longname = 'Universal Serial Bus (LS/FS) signalling' + desc = 'USB 1.x (low-speed and full-speed) signalling protocol.' + license = 'gplv2+' + inputs = ['logic'] + outputs = ['usb_signalling'] + probes = [ + {'id': 'dp', 'name': 'D+', 'desc': 'USB D+ signal'}, + {'id': 'dm', 'name': 'D-', 'desc': 'USB D- signal'}, + ] + optional_probes = [] + options = { + 'signalling': ['Signalling', 'full-speed'], + } + annotations = [ + ['Text', 'Human-readable text'] + ] + + def __init__(self): + self.sym = 'J' # The "idle" state is J. + self.samplenum = 0 + self.scount = 0 + self.packet = '' + self.syms = [] + self.oldpins = None + + def start(self, metadata): + self.samplerate = metadata['samplerate'] + self.out_proto = self.add(srd.OUTPUT_PROTO, 'usb_signalling') + self.out_ann = self.add(srd.OUTPUT_ANN, 'usb_signalling') + + def report(self): + pass + + def decode(self, ss, es, data): + for (self.samplenum, pins) in data: + + # Note: self.samplenum is the absolute sample number, whereas + # self.scount only counts the number of samples since the + # last change in the D+/D- lines. + self.scount += 1 + + # Ignore identical samples early on (for performance reasons). + if self.oldpins == pins: + continue + self.oldpins, (dp, dm) = pins, pins + + if self.options['signalling'] == 'low-speed': + sym = symbols_ls[dp, dm] + elif self.options['signalling'] == 'full-speed': + sym = symbols_fs[dp, dm] + + self.put(0, 0, self.out_ann, [0, [sym]]) + self.put(0, 0, self.out_proto, ['SYM', sym]) + + # Wait for a symbol change (i.e., change in D+/D- lines). + if sym == self.sym: + continue + + ## # Debug code: + ## self.syms.append(sym + ' ') + ## if len(self.syms) == 16: + ## self.put(0, 0, self.out_ann, [0, [''.join(self.syms)]]) + ## self.syms = [] + # continue + + # How many bits since the last transition? + if self.packet != '' or self.sym != 'J': + if self.options['signalling'] == 'low-speed': + bitrate = 1500000 # 1.5Mb/s (+/- 1.5%) + elif self.options['signalling'] == 'full-speed': + bitrate = 12000000 # 12Mb/s (+/- 0.25%) + bitcount = int((self.scount - 1) * bitrate / self.samplerate) + else: + bitcount = 0 + + if self.sym == 'SE0': + if bitcount == 1: + # End-Of-Packet (EOP) + # self.put(0, 0, self.out_ann, + # [0, [packet_decode(self.packet), self.packet]]) + if self.packet != '': # FIXME? + self.put(0, 0, self.out_ann, [0, ['PACKET: %s' % self.packet]]) + self.put(0, 0, self.out_proto, ['PACKET', self.packet]) + else: + # Longer than EOP, assume reset. + self.put(0, 0, self.out_ann, [0, ['RESET']]) + self.put(0, 0, self.out_proto, ['RESET', None]) + # self.put(0, 0, self.out_ann, [0, [self.packet]]) + self.scount = 0 + self.sym = sym + self.packet = '' + continue + + # Add bits to the packet string. + self.packet += '1' * bitcount + + # Handle bit stuffing. + if bitcount < 6 and sym != 'SE0': + self.packet += '0' + elif bitcount > 6: + self.put(0, 0, self.out_ann, [0, ['BIT STUFF ERROR']]) + self.put(0, 0, self.out_proto, ['BIT STUFF ERROR', None]) + + self.scount = 0 + self.sym = sym + |