diff options
Diffstat (limited to 'decoders/sdcard_sd/lists.py')
| -rw-r--r-- | decoders/sdcard_sd/lists.py | 185 |
1 files changed, 0 insertions, 185 deletions
diff --git a/decoders/sdcard_sd/lists.py b/decoders/sdcard_sd/lists.py deleted file mode 100644 index 479c9f3..0000000 --- a/decoders/sdcard_sd/lists.py +++ /dev/null @@ -1,185 +0,0 @@ -## -## This file is part of the sigrok project. -## -## Copyright (C) 2015 Uwe Hermann <uwe@hermann-uwe.de> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# Normal commands (CMD) -# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't -# seem to be mentioned in the spec, but aren't marked as reserved either. -cmd_names = { - 0: 'GO_IDLE_STATE', - # 1: Reserved - 2: 'ALL_SEND_CID', - 3: 'SEND_RELATIVE_ADDR', - 4: 'SET_DSR', - 5: 'IO_SEND_OP_COND', # SDIO-only - 6: 'SWITCH_FUNC', # New since spec 1.10 - 7: 'SELECT/DESELECT_CARD', - 8: 'SEND_IF_COND', - 9: 'SEND_CSD', - 10: 'SEND_CID', - 11: 'VOLTAGE_SWITCH', - 12: 'STOP_TRANSMISSION', - 13: 'SEND_STATUS', - # 14: Reserved - 15: 'GO_INACTIVE_STATE', - 16: 'SET_BLOCKLEN', - 17: 'READ_SINGLE_BLOCK', - 18: 'READ_MULTIPLE_BLOCK', - 19: 'SEND_TUNING_BLOCK', - 20: 'SPEED_CLASS_CONTROL', - # 21-22: Reserved - 23: 'SET_BLOCK_COUNT', - 24: 'WRITE_BLOCK', - 25: 'WRITE_MULTIPLE_BLOCK', - 26: 'Reserved for manufacturer', - 27: 'PROGRAM_CSD', - 28: 'SET_WRITE_PROT', - 29: 'CLR_WRITE_PROT', - 30: 'SEND_WRITE_PROT', - # 31: Reserved - 32: 'ERASE_WR_BLK_START', - 33: 'ERASE_WR_BLK_END', - 34: 'Reserved for CMD6', # New since spec 1.10 - 35: 'Reserved for CMD6', # New since spec 1.10 - 36: 'Reserved for CMD6', # New since spec 1.10 - 37: 'Reserved for CMD6', # New since spec 1.10 - 38: 'ERASE', - # 39: Reserved - 40: 'Reserved for security specification', - # 41: Reserved - 42: 'LOCK_UNLOCK', - # 43-49: Reserved - 50: 'Reserved for CMD6', # New since spec 1.10 - # 51: Reserved - 52: 'IO_RW_DIRECT', # SDIO-only - 53: 'IO_RW_EXTENDED', # SDIO-only - 54: 'Unknown', - 55: 'APP_CMD', - 56: 'GEN_CMD', - 57: 'Reserved for CMD6', # New since spec 1.10 - # 58-59: Reserved - 60: 'Reserved for manufacturer', - 61: 'Reserved for manufacturer', - 62: 'Reserved for manufacturer', - 63: 'Reserved for manufacturer', -} - -# Application-specific commands (ACMD) -# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't -# seem to be mentioned in the spec, but aren't marked as reserved either. -acmd_names = { - # 1-5: Reserved - 6: 'SET_BUS_WIDTH', - # 7-12: Reserved - 13: 'SD_STATUS', - 14: 'Reserved for Security Application', - 15: 'Reserved for Security Application', - 16: 'Reserved for Security Application', - # 17: Reserved - 18: 'Reserved for SD security applications', - # 19-21: Reserved - 22: 'SEND_NUM_WR_BLOCKS', - 23: 'SET_WR_BLK_ERASE_COUNT', - # 24: Reserved - 25: 'Reserved for SD security applications', - 26: 'Reserved for SD security applications', - 27: 'Reserved for security specification', - 28: 'Reserved for security specification', - # 29: Reserved - 30: 'Reserved for security specification', - 31: 'Reserved for security specification', - 32: 'Reserved for security specification', - 33: 'Reserved for security specification', - 34: 'Reserved for security specification', - 35: 'Reserved for security specification', - # 36-37: Reserved - 38: 'Reserved for SD security applications', - # 39-40: Reserved - 41: 'SD_SEND_OP_COND', - 42: 'SET_CLR_CARD_DETECT', - 43: 'Reserved for SD security applications', - 44: 'Reserved for SD security applications', - 45: 'Reserved for SD security applications', - 46: 'Reserved for SD security applications', - 47: 'Reserved for SD security applications', - 48: 'Reserved for SD security applications', - 49: 'Reserved for SD security applications', - 50: 'Unknown', - 51: 'SEND_SCR', - 52: 'Reserved for security specification', - 53: 'Reserved for security specification', - 54: 'Reserved for security specification', - 55: 'Non-existant', # Doesn't exist (equivalent to CMD55) - 56: 'Reserved for security specification', - 57: 'Reserved for security specification', - 58: 'Reserved for security specification', - 59: 'Reserved for security specification', - 60: 'Unknown', - 61: 'Unknown', - 62: 'Unknown', - 63: 'Unknown', -} - -accepted_voltages = { - 0b0001: '2.7-3.6V', - 0b0010: 'reserved for low voltage range', - 0b0100: 'reserved', - 0b1000: 'reserved', - # All other values: "not defined". -} - -card_status = { - 0: 'Reserved for manufacturer test mode', - 1: 'Reserved for manufacturer test mode', - 2: 'Reserved for application specific commands', - 3: 'AKE_SEQ_ERROR', - 4: 'Reserved for SDIO card', - 5: 'APP_CMD', - 6: 'Unknown', - 7: 'Unknown', - 8: 'READY_FOR_DATA', - 9: 'CURRENT_STATE', # CURRENT_STATE is a 4-bit value (decimal: 0..15). - 10: 'CURRENT_STATE', - 11: 'CURRENT_STATE', - 12: 'CURRENT_STATE', - 13: 'ERASE_RESET', - 14: 'CARD_ECC_DISABLED', - 15: 'WP_ERASE_SKIP', - 16: 'CSD_OVERWRITE', - 17: 'Reserved for DEFERRED_RESPONSE', # See eSD addendum - 18: 'Reserved', - 19: 'ERROR', - 20: 'CC_ERROR', - 21: 'CARD_ECC_FAILED', - 22: 'ILLEGAL_COMMAND', - 23: 'COM_CRC_ERROR', - 24: 'LOCK_UNLOCK_FAILED', - 25: 'CARD_IS_LOCKED', - 26: 'WP_VIOLATION', - 27: 'ERASE_PARAM', - 28: 'ERASE_SEQ_ERROR', - 29: 'BLOCK_LEN_ERROR', - 30: 'ADDRESS_ERROR', - 31: 'OUT_OF_RANGE', -} - -sd_status = { - # 311:0: Reserved for manufacturer - # 391:312: Reserved -} |