diff options
| -rw-r--r-- | decoders/enc28j60/__init__.py | 32 | ||||
| -rw-r--r-- | decoders/enc28j60/pd.py | 477 |
2 files changed, 509 insertions, 0 deletions
diff --git a/decoders/enc28j60/__init__.py b/decoders/enc28j60/__init__.py new file mode 100644 index 0000000..42f4377 --- /dev/null +++ b/decoders/enc28j60/__init__.py @@ -0,0 +1,32 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2019 Jiahao Li <reg@ljh.me> +## +## Permission is hereby granted, free of charge, to any person obtaining a copy +## of this software and associated documentation files (the "Software"), to deal +## in the Software without restriction, including without limitation the rights +## to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +## copies of the Software, and to permit persons to whom the Software is +## furnished to do so, subject to the following conditions: +## +## The above copyright notice and this permission notice shall be included in all +## copies or substantial portions of the Software. +## +## THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +## IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +## FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +## AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +## LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +## OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +## SOFTWARE. + +''' +This decoder stacks on top of the 'spi' PD and decodes the protocol spoken +by the Microchip ENC28J60 Ethernet chip. + +Details: +http://ww1.microchip.com/downloads/en/DeviceDoc/39662e.pdf +''' + +from .pd import Decoder diff --git a/decoders/enc28j60/pd.py b/decoders/enc28j60/pd.py new file mode 100644 index 0000000..535f32c --- /dev/null +++ b/decoders/enc28j60/pd.py @@ -0,0 +1,477 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2019 Jiahao Li <reg@ljh.me> +## +## Permission is hereby granted, free of charge, to any person obtaining a copy +## of this software and associated documentation files (the "Software"), to deal +## in the Software without restriction, including without limitation the rights +## to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +## copies of the Software, and to permit persons to whom the Software is +## furnished to do so, subject to the following conditions: +## +## The above copyright notice and this permission notice shall be included in all +## copies or substantial portions of the Software. +## +## THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +## IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +## FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +## AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +## LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +## OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +## SOFTWARE. + +import sigrokdecode as srd + +OPCODE_MASK = 0b11100000 +REG_ADDR_MASK = 0b00011111 + +OPCODE_HANDLERS = { + 0b00000000: '_process_rcr', + 0b00100000: '_process_rbm', + 0b01000000: '_process_wcr', + 0b01100000: '_process_wbm', + 0b10000000: '_process_bfs', + 0b10100000: '_process_bfc', + 0b11100000: '_process_src', +} + +ANN_RCR = 0 +ANN_RBM = 1 +ANN_WCR = 2 +ANN_WBM = 3 +ANN_BFS = 4 +ANN_BFC = 5 +ANN_SRC = 6 + +ANN_DATA = 7 +ANN_REG_ADDR = 8 + +ANN_WARNING = 9 + +REG_ADDR_ECON1 = 0x1F +BIT_ECON1_BSEL0 = 0b00000001 +BIT_ECON1_BSEL1 = 0b00000010 + +REGS = [ + [ + 'ERDPTL', + 'ERDPTH', + 'EWRPTL', + 'EWRPTH', + 'ETXSTL', + 'ETXSTH', + 'ETXNDL', + 'ETXNDH', + 'ERXSTL', + 'ERXSTH', + 'ERXNDL', + 'ERXNDH', + 'ERXRDPTL', + 'ERXRDPTH', + 'ERXWRPTL', + 'ERXWRPTH', + 'EDMASTL', + 'EDMASTH', + 'EDMANDL', + 'EDMANDH', + 'EDMADSTL', + 'EDMADSTH', + 'EDMACSL', + 'EDMACSH', + '—', + '—', + 'Reserved', + 'EIE', + 'EIR', + 'ESTAT', + 'ECON2', + 'ECON1', + ], + [ + 'EHT0', + 'EHT1', + 'EHT2', + 'EHT3', + 'EHT4', + 'EHT5', + 'EHT6', + 'EHT7', + 'EPMM0', + 'EPMM1', + 'EPMM2', + 'EPMM3', + 'EPMM4', + 'EPMM5', + 'EPMM6', + 'EPMM7', + 'EPMCSL', + 'EPMCSH', + '—', + '—', + 'EPMOL', + 'EPMOH', + 'Reserved', + 'Reserved', + 'ERXFCON', + 'EPKTCNT', + 'Reserved', + 'EIE', + 'EIR', + 'ESTAT', + 'ECON2', + 'ECON1', + ], + [ + 'MACON1', + 'Reserved', + 'MACON3', + 'MACON4', + 'MABBIPG', + '—', + 'MAIPGL', + 'MAIPGH', + 'MACLCON1', + 'MACLCON2', + 'MAMXFLL', + 'MAMXFLH', + 'Reserved', + 'Reserved', + 'Reserved', + '—', + 'Reserved', + 'Reserved', + 'MICMD', + '—', + 'MIREGADR', + 'Reserved', + 'MIWRL', + 'MIWRH', + 'MIRDL', + 'MIRDH', + 'Reserved', + 'EIE', + 'EIR', + 'ESTAT', + 'ECON2', + 'ECON1', + ], + [ + 'MAADR5', + 'MAADR6', + 'MAADR3', + 'MAADR4', + 'MAADR1', + 'MAADR2', + 'EBSTSD', + 'EBSTCON', + 'EBSTCSL', + 'EBSTCSH', + 'MISTAT', + '—', + '—', + '—', + '—', + '—', + '—', + '—', + 'EREVID', + '—', + '—', + 'ECOCON', + 'Reserved', + 'EFLOCON', + 'EPAUSL', + 'EPAUSH', + 'Reserved', + 'EIE', + 'EIR', + 'ESTAT', + 'ECON2', + 'ECON1', + ], +] + +class Decoder(srd.Decoder): + api_version = 3 + id = 'enc28j60' + name = 'ENC28J60' + longname = 'Microchip ENC28J60' + desc = 'Microchip ENC28J60 10Base-T Ethernet controller protocol.' + license = 'mit' + inputs = ['spi'] + outputs = ['enc28j60'] + annotations = ( + ('rcr', 'Read Control Register'), + ('rbm', 'Read Buffer Memory'), + ('wcr', 'Write Control Register'), + ('wbm', 'Write Buffer Memory'), + ('bfs', 'Bit Field Set'), + ('bfc', 'Bit Field Clear'), + ('src', 'System Reset Command'), + ('data', 'Data'), + ('reg-addr', 'Register Address'), + ('warning', 'Warning'), + ) + annotation_rows = ( + ('commands', 'Commands', + (ANN_RCR, ANN_RBM, ANN_WCR, ANN_WBM, ANN_BFS, ANN_BFC, ANN_SRC)), + ('fields', 'Fields', (ANN_DATA, ANN_REG_ADDR)), + ('warnings', 'Warnings', (ANN_WARNING,)), + ) + + def __init__(self): + self.reset() + + def reset(self): + self.mosi = [] + self.miso = [] + self.ranges = [] + self.command_start = None + self.command_end = None + self.active = False + self.bsel0 = None + self.bsel1 = None + + def start(self): + self.ann = self.register(srd.OUTPUT_ANN) + + def _process_command(self): + if len(self.mosi) == 0: + self.active = False + return + + header = self.mosi[0] + opcode = header & OPCODE_MASK + + if opcode not in OPCODE_HANDLERS: + self._put_command_warning("Unknown opcode.") + self.active = False + return + + getattr(self, OPCODE_HANDLERS[opcode])() + + self.active = False + + def _get_register_name(self, reg_addr): + if (self.bsel0 is None) or (self.bsel1 is None): + # We don't know the bank we're in yet. + return None + else: + bank = (self.bsel1 << 1) + self.bsel0 + return REGS[bank][reg_addr] + + def _put_register_header(self): + reg_addr = self.mosi[0] & REG_ADDR_MASK + reg_name = self._get_register_name(reg_addr) + + if reg_name is None: + # We don't know the bank we're in yet. + self.put(self.command_start, self.ranges[1][0], self.ann, [ + ANN_REG_ADDR, + [ + 'Reg Bank ? Addr 0x{0:02X}'.format(reg_addr), + '?:{0:02X}'.format(reg_addr), + ]]) + self.put(self.command_start, self.ranges[1][0], self.ann, [ + ANN_WARNING, + [ + 'Warning: Register bank not known yet.', + 'Warning', + ]]) + else: + self.put(self.command_start, self.ranges[1][0], self.ann, [ + ANN_REG_ADDR, + [ + 'Reg {0}'.format(reg_name), + '{0}'.format(reg_name), + ]]) + + if (reg_name == '-') or (reg_name == 'Reserved'): + self.put(self.command_start, self.ranges[1][0], self.ann, [ + ANN_WARNING, + [ + 'Warning: Invalid register accessed.', + 'Warning', + ]]) + + def _put_data_byte(self, data, byte_index, binary=False): + if byte_index == len(self.mosi) - 1: + end_sample = self.command_end + else: + end_sample = self.ranges[byte_index + 1][0] + + if binary: + self.put(self.ranges[byte_index][0], end_sample, self.ann, [ + ANN_DATA, + [ + 'Data 0b{0:08b}'.format(data), + '{0:08b}'.format(data), + ]]) + else: + self.put(self.ranges[byte_index][0], end_sample, self.ann, [ + ANN_DATA, + [ + 'Data 0x{0:02X}'.format(data), + '{0:02X}'.format(data), + ]]) + + def _put_command_warning(self, reason): + self.put(self.command_start, self.command_end, self.ann, [ + ANN_WARNING, + [ + 'Warning: {0}'.format(reason), + 'Warning', + ]]) + + def _process_rcr(self): + self.put(self.command_start, self.command_end, + self.ann, [ANN_RCR, ['Read Control Register', 'RCR']]) + + if (len(self.mosi) != 2) and (len(self.mosi) != 3): + self._put_command_warning('Invalid command length.') + return + + self._put_register_header() + + reg_name = self._get_register_name(self.mosi[0] & REG_ADDR_MASK) + if reg_name is None: + # We can't tell if we're accessing MAC/MII registers or not + # Let's trust the user in this case. + pass + else: + if (reg_name[0] == 'M') and (len(self.mosi) != 3): + self._put_command_warning('Attempting to read a MAC/MII ' + + 'register without using the dummy byte.') + return + + if (reg_name[0] != 'M') and (len(self.mosi) != 2): + self._put_command_warning('Attempting to read a non-MAC/MII ' + + 'register using the dummy byte.') + return + + if len(self.mosi) == 2: + self._put_data_byte(self.miso[1], 1) + else: + self.put(self.ranges[1][0], self.ranges[2][0], self.ann, [ + ANN_DATA, + [ + 'Dummy Byte', + 'Dummy', + ]]) + self._put_data_byte(self.miso[2], 2) + + def _process_rbm(self): + if self.mosi[0] != 0b00111010: + self._put_command_warning('Invalid header byte.') + return + + self.put(self.command_start, self.command_end, self.ann, [ + ANN_RBM, + [ + 'Read Buffer Memory: Length {0}'.format( + len(self.mosi) - 1), + 'RBM', + ]]) + + for i in range(1, len(self.miso)): + self._put_data_byte(self.miso[i], i) + + def _process_wcr(self): + self.put(self.command_start, self.command_end, + self.ann, [ANN_WCR, ['Write Control Register', 'WCR']]) + + if len(self.mosi) != 2: + self._put_command_warning('Invalid command length.') + return + + self._put_register_header() + self._put_data_byte(self.mosi[1], 1) + + if self.mosi[0] & REG_ADDR_MASK == REG_ADDR_ECON1: + self.bsel0 = (self.mosi[1] & BIT_ECON1_BSEL0) >> 0 + self.bsel1 = (self.mosi[1] & BIT_ECON1_BSEL1) >> 1 + + def _process_wbm(self): + if self.mosi[0] != 0b01111010: + self._put_command_warning('Invalid header byte.') + return + + self.put(self.command_start, self.command_end, self.ann, [ + ANN_WBM, + [ + 'Write Buffer Memory: Length {0}'.format( + len(self.mosi) - 1), + 'WBM', + ]]) + + for i in range(1, len(self.mosi)): + self._put_data_byte(self.mosi[i], i) + + def _process_bfc(self): + self.put(self.command_start, self.command_end, + self.ann, [ANN_BFC, ['Bit Field Clear', 'BFC']]) + + if len(self.mosi) != 2: + self._put_command_warning('Invalid command length.') + return + + self._put_register_header() + self._put_data_byte(self.mosi[1], 1, True) + + if self.mosi[0] & REG_ADDR_MASK == REG_ADDR_ECON1: + if self.mosi[1] & BIT_ECON1_BSEL0: + self.bsel0 = 0 + if self.mosi[1] & BIT_ECON1_BSEL1: + self.bsel1 = 0 + + def _process_bfs(self): + self.put(self.command_start, self.command_end, + self.ann, [ANN_BFS, ['Bit Field Set', 'BFS']]) + + if len(self.mosi) != 2: + self._put_command_warning('Invalid command length.') + return + + self._put_register_header() + self._put_data_byte(self.mosi[1], 1, True) + + if self.mosi[0] & REG_ADDR_MASK == REG_ADDR_ECON1: + if self.mosi[1] & BIT_ECON1_BSEL0: + self.bsel0 = 1 + if self.mosi[1] & BIT_ECON1_BSEL1: + self.bsel1 = 1 + + def _process_src(self): + self.put(self.command_start, self.command_end, + self.ann, [ANN_SRC, ['System Reset Command', 'SRC']]) + + if len(self.mosi) != 1: + self._put_command_warning('Invalid command length.') + return + + self.bsel0 = 0 + self.bsel1 = 0 + + def decode(self, ss, es, data): + ptype, data1, data2 = data + + if ptype == 'CS-CHANGE': + new_cs = data2 + + if new_cs == 0: + self.active = True + self.command_start = ss + self.mosi = [] + self.miso = [] + self.ranges = [] + elif new_cs == 1: + if self.active: + self.command_end = es + self._process_command() + elif ptype == 'DATA': + mosi, miso = data1, data2 + + self.mosi.append(mosi) + self.miso.append(miso) + self.ranges.append((ss, es)) |