diff options
| -rw-r--r-- | decoders/ir_nec6122/__init__.py | 26 | ||||
| -rw-r--r-- | decoders/ir_nec6122/pd.py | 172 |
2 files changed, 198 insertions, 0 deletions
diff --git a/decoders/ir_nec6122/__init__.py b/decoders/ir_nec6122/__init__.py new file mode 100644 index 0000000..972d5a9 --- /dev/null +++ b/decoders/ir_nec6122/__init__.py @@ -0,0 +1,26 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2014 Gump Yang <gump.yang@gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +''' +NEC 6121/6122 is a biphase/manchester based infrared remote control protocol. +''' + +from .pd import * + diff --git a/decoders/ir_nec6122/pd.py b/decoders/ir_nec6122/pd.py new file mode 100644 index 0000000..ba1cdf9 --- /dev/null +++ b/decoders/ir_nec6122/pd.py @@ -0,0 +1,172 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2014 Gump Yang <gump.yang@gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +import sigrokdecode as srd + +class Decoder(srd.Decoder): + api_version = 1 + id = 'ir_nec6122' + name = 'IR NEC 6122' + longname = '1-Wire Infrared remote controller NEC 6122' + desc = 'Unidirectional, asynchronous serial bus.' + license = 'gplv2+' + inputs = ['logic'] + outputs = ['ir_nec6122'] + probes = [ + {'id': 'ir', 'name': 'IR', 'desc': 'Data line'}, + ] + optional_probes = [] + options = { + 'level': ['Tirgger Level L/H', 0], + 'cnt_peroid': ['Peroid time (us)', 13500], + 'cnt_repeat': ['Repeat time (us)', 11250], + 'cnt_repeat_end': ['Repeat end time (us)', 562], + 'cnt_accuracy': ['Accuracy range (us)', 100], + 'cnt_dazero': ['Data 0 time (us)', 1125], + 'cnt_daone': ['Data 1 time (us)', 2250], + 'polarity': ['Polarity', 'active-low'], + } + annotations = [ + ['bit', 'Bit'], + ['preoid', 'Preoid'], + ['info', 'Info'], + ['error', 'Error'], + ] + annotation_rows = ( + ('fields', 'Fields', (1, 2, 3, 4, 5, 6)), + ('bits', 'Bits', (0,)), + ) + + def putx(self, data): + self.put(self.ss_edge, self.samplenum, self.out_ann, data) + + def putx(self, data): + self.put(self.ss_start, self.samplenum, self.out_ann, data) + + def putb(self, data): + self.put(self.ss_bit, self.samplenum, self.out_ann, data) + + def __init__(self, **kwargs): + self.olddata = None + self.ss_edge = 0 + self.ss_bit = 0 + self.first_transition = True + self.bitwidth = None + self.state = 'IDLE' + self.data = 0; + self.count = 0; + self.ss_start = 0 + self.act_polar = 0 + + def start(self): + # self.out_python = self.register(srd.OUTPUT_PYTHON) + self.out_ann = self.register(srd.OUTPUT_ANN) + self.act_polar = 1 if self.options['polarity'] == 'active-low' else 0 + self.old_ir = self.act_polar + + def metadata(self, key, value): + if key == srd.SRD_CONF_SAMPLERATE: + self.samplerate = value + samplerate = float(self.samplerate) + + x = float(self.options['cnt_accuracy']) / 1000000.0 + self.margin = int(samplerate * x) - 1 + x = float(self.options['cnt_peroid']) / 1000000.0 + self.preoid = int(samplerate * x) - 1 + x = float(self.options['cnt_repeat']) / 1000000.0 + self.repeat = int(samplerate * x) - 1 + x = float(self.options['cnt_repeat_end']) / 1000000.0 + self.repeat_end = int(samplerate * x) - 1 + x = float(self.options['cnt_dazero']) / 1000000.0 + self.dazero = int(samplerate * x) - 1 + x = float(self.options['cnt_daone']) / 1000000.0 + self.daone = int(samplerate * x) - 1 + x = float(10000) / 1000000.0 + self.end = int(samplerate * x) - 1 + + def handle_bits(self, tick): + ret = 0xff + if tick in range(self.dazero - self.margin, + self.dazero + self.margin): + ret = 0 + elif tick in range(self.daone - self.margin, + self.daone + self.margin): + ret = 1 + + if ret < 2: + self.putb([0, ['%d' % ret]]) + self.data = self.data * 2 + ret + self.count = self.count + 1 + + self.ss_bit = self.samplenum + return ret; + + def data_judge(self, name): + buf = int((self.data & 0xff00) / 0x100) + nbuf = int(self.data & 0xff) + ret = buf & nbuf + if ret == 0: + self.putx([2, ['%s: 0x%02x' % (name, buf)]]) + else: + self.putx([3, ['%s Error: 0x%04x' % (name, self.data)]]) + + self.data = self.count = 0 + self.ss_bit = self.ss_start = self.samplenum + return ret + + def decode(self, ss, es, data): + if self.samplerate is None: + raise Exception("Cannot decode without samplerate.") + for (self.samplenum, pins) in data: + self.ir = pins[0] + + # Wait for any edge (rising or falling). + if self.old_ir == self.ir: + continue + + if self.old_ir == self.act_polar: + b = self.samplenum - self.ss_bit + # State machine. + if self.state == 'IDLE': + if b in range(self.preoid - self.margin, + self.preoid + self.margin): + self.putx([1, ['Preoid', 'Pre', 'P']]) + self.data = self.count = 0 + self.state = 'ADDRESS' + elif b in range(self.repeat - self.margin, + self.repeat + self.margin): + self.putx([1, ['Repeat', 'Rep', 'R']]) + self.data = self.count = 0 + self.ss_bit = self.ss_start = self.samplenum + elif self.state == 'ADDRESS': + self.handle_bits(b) + if self.count > 15: + if self.data_judge(self.state) == 0: + self.state = 'CODE' + else: + self.state = 'IDLE' + elif self.state == 'CODE': + self.handle_bits(b) + if self.count > 15: + self.data_judge(self.state) + self.state = 'IDLE' + + self.old_ir = self.ir + |